1 Series E81 130i (N52K) 3-door
Necessary preliminary tasks:
•
Disconnect battery negative lead.
•
Remove front underbody protection.
•
Remove rear underbody protection.
•
If necessary, remove fan cowl.
•
Remove complete exhaust system.
•
Remove heat shields.
•
Support engine with lifter when removing transmission.
Release screws (1).
Remove bracket and heat shield.
Unclip lines (2).
Remove bracket (3).
Disconnect plug connector (1).
Release screws (2).
Remove retaining plate (3).
Tightening torque 24 00 2AZ
.
Release aluminium screws on right next to cable retaining plate
with special tool 00 9 010 .
Blue aluminium screws/bolts must be replaced.
Tightening torque 24 00 2AZ
.
RA Removing and installing automatic transmission (GA6L45R)
BMW AG - TIS
22.01.2013 04:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -