1 Series E81 130i (N52K) 3-door
24 35 700
Removing and installing/replacing input and
output speed sensor (GA6L45R)
Important!
After completion of work, check transmission fluid level.
Use only approved transmission oil.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Remove mechatronics
Unlock and disconnect plug (1).
Release screws (2).
Detach input and output speed sensor from mechatronics.
Tightening torque 24 30 4AZ
.
RA Removing and installing/replacing input and output speed sensor (GA6L45R)
BMW AG - TIS
22.01.2013 04:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
