1 Series E81 130i (N52K) 3-door
52 26 311
Removing and installing/replacing lock for left
or right rear seat backrest
Gently slide lock trim (1) on side edge of backrest downwards
and unclip to one side.
Gently slide lock trim (1) on rear side towards middle and unclip.
Remove lock trim (1).
Installation:
Retaining lugs on trim must not be damaged.
Important!
Risk of damage!
Insert plastic wedge from outside between trim (1) and lock.
Carefully lever outer side of trim (1) with plastic wedge upwards
out of catch.
Lever inner side of trim (1) with plastic wedge out of catch.
Remove trim upwards.
Lever out backrest cover (1) in working area.
RA Removing and installing/replacing lock for left or right rear seat backrest
BMW AG - TIS
22.01.2013 08:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
