1 Series E87 118d (M47T2) 5-door
Remove alternator ribbed V-belt from tensioning roller.
Open plug (1).
Tightening torque 11 14 4AZ
.
Installation:
Replace sealing ring.
Release nut (1) on sprocket wheel of H.P. pump.
Tightening torque 13 52 2AZ
.
Screw special tool 13 5 192 into timing case cover at front.
Screw special tool 13 5 191 without forcing screw (1) into
sprocket wheel of H.P. pump.
Then insert forcing screw (1) until contact is made.
RA Removing and installing/replacing high-pressure pump (M47TU, M47T2)
BMW AG - TIS
18.01.2013 08:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
