1 Series 120i (N43) Convertible
Release trim (1) from catches (2) and remove.
Carefully feed out power window unit (3) in upward direction.
Disconnect associated plug connection and remove complete
power window unit (3).
Installation:
Ensure trim (1) is correctly seated.
Replacement:
•
Modify rear side window
•
Modify flat motor for power window unit
RA Removing and installing/replacing complete rear left or right power window unit
BMW AG - TIS
15.01.2013 19:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -