3 Series E36 318i (M43) SAL
11 00 050
Removing and installing engine (M43 /
M43TU)
Special tools required:
•
11 0 070
Caution!
CNG vehicles:
Observe safety regulations for working on vehicles with
autogas systems, refer to 13 80 ...
Drain CNG system, refer to 13 80 ...
E36
Lift engine hood into assembly position and remove firewall (air
manifold). These work steps are described in Removing complete
wiper bracket.
Z3
Move engine hood to assembly position:
Note:
The following work must be carried out with a second person
assisting. Work instruction applies to left and right sides.
Hold engine bonnet/hood.
Unclip retainer (1).
Unhook damper and suspend in ball head (2).
RA Removing and installing engine (M43 / M43TU)
BMW AG - TIS
25.01.2013 05:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
