3 Series E36 318i (M44) SAL
Slide reinforcement plate into C-pillar approx. 30 mm deep and
weld.
Fit in side panel. Drill holes for plug welding at the C-pillar joint.
Coat with zinc dust paint.
Coat mating surfaces with zinc dust paint.
Apply sealing compound (refer to BMW Parts) in opening to the
tank filler neck.
Fit in and clamp side panel. Weld wheel housing extension and
door opening joints.
Braze entrance joint.
RA Replacing right rear side panel (C-pillar partial replacement)
BMW AG - TIS
27.01.2013 07:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
