bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M41)|Page 381 > < 1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M41)

3 Series E36 318tds (M41) SAL

Page 2
background image

If necessary, remove water pump,

refer to 11 51 000.

Remove vane pump from power steering unit.

Note:

Lines remain connected.

Remove alternator,

refer to 12 31 020.

Unfastening bearing block from alternator and power steering
pump.

Remove bearing block.

Installation:

Remember to fit hollow bush (1).

Remove hub for vibration damper,

refer to 11 23 031.

Caution!

When working on chain drive, injection pump and adapter for
injection pump must be installed.

(The adapter is fitted to exchange engines as a substitute
pump).

RA  Removing and installing, sealing/replacing timing case cover at bottom (M41)

BMW AG - TIS

06.02.2013  20:37

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M41)|Page 381 > < 1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M41)