3 Series E36 318tds (M41) SAL
Unfasten connections on starter..
Tightening torque, refer to Technical Data 12 41 4AZ
Unfasten screws.
Tightening torque, refer to Technical Data 12 41 1AZ
Installation:
Fit hose bracket to lower screw on starter.
Swivel starter out past engine mount.
RA Removing and installing or replacing starter (M41)
BMW AG - TIS
06.02.2013 21:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
