3 Series E36 318tds (M41) SAL
Clip out coolant expansion tank and lay aside.
Unfasten protective cover from chain tensioner.
Installation:
Check O-ring, replace if necessary.
Tightening torque,
refer to Technical Data 11 14 3AZ
Unfasten central nut (waf 18).
Screw in special tool 13 5 120 without jack screw.
RA Removing and installing/replacing fuel injection pump (M41)
BMW AG - TIS
06.02.2013 21:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
