3 Series E36 318tds (M41) SAL
Unscrew screws (1 and 2).
Drive dowel pin (1) out towards clutch case with a cotter pin
extractor.
Drive out cotter pin (2) with a cotter pin extractor.
Unfasten screws on transmission case (9 off).
RA Removing and installing/replacing complete input and output shafts (S5D 200G/ E3
BMW AG - TIS
06.02.2013 22:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
