3 Series E36 318tds (M41) SAL
23 21 505
Removing and installing/replacing complete
input and output shafts (S5D 200G/ E36 M41)
Transmission removed.
Unscrew oil drain plug.
Drain off transmission oil.
Secure special tool 23 0 100 on the bore of the oil drain plug.
Fit transmission to assembly frame 00 1 490 with special tool
23 0 100.
Removing clutch release mechanism and release lever,
refer to 21 51 500.
Block output flange using special tool 23 0 020.
Unfasten collar nut with special tool 23 1 210.
RA Removing and installing/replacing complete input and output shafts (S5D 200G/ E3
BMW AG - TIS
06.02.2013 22:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -