3 Series E36 318tds (M41) SAL
Pull off output flange.
Note:
If ease-of-movement is impaired, remove output flange with
special tool 33 1 150.
Remove radial seal with special tool 00 5 010.
Remove cap (1).
Remove compression springs (1) and cylinder pins (2).
RA Removing and installing/replacing complete input and output shafts (S5D 200G/ E3
BMW AG - TIS
06.02.2013 22:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
