3 Series E36 318tds (M41) SAL
Attach 4 rollers to the selector shaft with Vaseline.
Insert selector shaft (1) into front case section.
Insert gearshift rail (2) with the opening upward into the case.
Install pivot lever with wider head (1) facing the selector rod (2).
Ground side of pivot lever must point towards case.
Attach pivot lever with the pin (3).
Install locking pin (1) in the selector rod (2) with Vaseline and
secure in the centre.
RA Removing and installing/replacing complete input and output shafts (S5D 200G/ E3
BMW AG - TIS
06.02.2013 22:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
