3 Series E36 318ti (M44) COMP
Support semi-trailing arm with a workshop hoist, unfasten screw
and lower semi-trailing arm.
Installation:
Tightening torque,
refer to Technical Data 33 52 1AZ .
Important!
Prevent the output shaft from falling down.
Mount special tools 33 2 111/116/117 with two wheel bolts.
Press out and remove output shaft.
Pull in output shaft using special tools 33 2 114/115/116.
RA Removing and installing/replacing left or right output shaft (compact, Z3)
BMW AG - TIS
07.02.2013 01:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -