3 Series E36 320i (M50) COUPE
Installation:
Sealing faces clean and free of seal debris.
Coat sealing edges on connecting face with 3 Bond 1209,
refer to BMW Parts.
Replace gasket.
Installation:
Insert all screws in oil pan.
Insert but do not yet tighten oil pan screws, gearbox side.
Tighten down screws on engine end.
Tighten screws on transmission end.
RA Removing and installing, sealing or replacing oil pan ( M50 from 9 / 92 )
BMW AG - TIS
06.02.2013 22:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
