3 Series E36 M3 (S50) CONVER
Installation note:
When fitting cylinder-head cover, ensure seal is correctly
seated on rear side of cylinder head.
Installation note:
Install cover retaining fixture and align cover.
Fit cover bolts without initial stress.
Tighten cover bolts crosswise, moving outwards from centre.
For tightening torque, refer to Technical Data 11 12 11AZ
RA Removing/installing/sealing cylinder-head cover (S50)
BMW AG - TIS
09.02.2013 20:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -