3 Series E36 M3 (S50) CONVER
Caution!
Do not damage sealing surface of screw plug.
Installation:
Move control valve into installing position by tapping gently on
head of screw.
Caution!
Always check installation dimension is exactly
20 mm + 1 mm, checking with depth gauge if necessary.
Provide special tools for removing valve springs.
Secure special tool 11 1 065 to special tool 00 1 490 .
-
Special tool 11 1 071
-
Special tool 11 1 067
-
Special tool 11 0 192
-
Special tool 11 1 045
-
Special tool 11 0 194
-
Special tool 11 0 342
-
Special tool 11 0 343
-
Special tool 11 3 411
Secure special tool 11 3 411 with special tool 11 1 045 in
special tool 11 1 065 .
Assemble special tools.
Secure cylinder head to special tool 11 1 065 .
Note:
Secure cylinder head from below, through locating board, with
special tool 11 3 412 in spark plug threads.
RA Dismantling and reinstalling cylinder head - cylinder head removed (S50)
BMW AG - TIS
09.02.2013 20:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -