3 Series E36 M3 (S50) CONVER
Note:
1.
Install bearing shells with continuous lubricant groove
and one retaining lug in engine block.
2.
Fit bearing shells without continuous lubricant groove
and two retaining lugs in bearing cover.
Note:
The axial guide on the crankshaft is fitted to bearing point 6.
Insert pilot bearing shell in the engine block.
The crankshaft is marked with yellow, green or white paint,
depending on the tolerance of the main bearing spigot.
Installation note:
The bearing shell classification for the bearing cover is
marked on the crankshaft in yellow, green or white paint.
RA Replacing all crankshaft main bearing shells (S50)
BMW AG - TIS
09.02.2013 20:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
