3 Series E36 M3 (S50) CONVER
Important!
Note direction and angle of rotation.
Rotate exhaust camshaft with open-end wrench until cam tips of
cylinder 1 are horizontally aligned with camshaft.
Important!
If dismantled incorrectly, i.e. without fixture, there is a risk of
initial damage or failure of camshaft.
Fit special tool 11 3 400 to press down exhaust camshaft and
screw into spark plug threads of cylinders 2 and 5.
Tightening torque,
refer to Technical Data 12 12 1AZ .
Preload exhaust camshaft by rotating eccentric shaft.
Unscrew all nuts for bearing cover on exhaust camshaft.
Important!
Do not tilt bearing cover when loosening special tool.
Relieve tension on special tool 11 3 400 and remove.
Remove bearing cover and lift out exhaust camshaft.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
