3 Series E36 M3 (S50) SAL
Move oil pan backwards.
Installation:
Sealing faces clean and free of seal debris.
Coat impact edges of separating face with 3 Bond 1209 (refer
to BMW Parts Service).
Check seal, replacing if necessary.
Installation:
Insert all screws on transmission end,
without preload at this stage. Tighten down screws on engine
end.
Tighten screws on transmission end.
RA Removing and installing, sealing or replacing oil pan (S50)
BMW AG - TIS
09.02.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
