3 Series E36 M3 (S50) SAL
Caution!
Ensure that bolts of splined hub on VANOS gearbox are
installed free of play.
Turn splined hub on VANOS gearbox clockwise as far as stop.
Use grease to hold clutch on drive shaft for radial piston pump.
Caution!
Push back splined shaft with hydraulic piston (1) in direction
of case (2) as far as stop before mounting VANOS control
unit.
Check gap "X" between VANOS case and splined shaft.
Specification X = 1
±
0.5 mm.
Replace O-rings.
Push in splined shaft together with VANOS control unit so far that
splines (1) are almost meshed with splined hub (2).
Note:
Straight splines of splined shaft will already be meshed with
intake camshaft.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 18 -
