3 Series E36 M3 (S50) SAL
Remove TDC sensor for cylinder identification.
Unfasten screws on VANOS adjustment unit.
Unscrew end cover (VANOS bridge) on timing case.
Caution!
Driver on radial piston pump can fall into engine.
For this reason, drive must be held in position with a finger
while pulling off VANOS control unit.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B30)
BMW AG - TIS
09.02.2013 21:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
