3 Series E36 M3 (S50) SAL
Remove special tools 17 0 002 and 21 5 010 from expansion
tank (1).
Slowly retract piston rod (2) of clutch slave cylinder (1) with special
tool 21 5 030.
Remove special tool 21 5 030 from clutch slave cylinder (1).
Fit clutch slave cylinder to the transmission.
Installation:
Replace self-locking nuts.
Tightening Torque,
refer to Technical Data 21 52 5AZ.
Perform bleeding routine with BMW Diagnosis System.
Note:
During the bleeding routine, residual air is pumped out of the
clutch master cylinder into the reservoir.
Check/top up oil level in hydraulic system (SMG),
refer to 21 53 501.
RA Bleeding clutch hydraulics (SMG)
BMW AG - TIS
09.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
