3 Series E36 M coupe (S54) COUPE
18 32 040
Removing and installing/replacing catalytic
converter with center muffler (Z3 / S54)
Support catalytic converter with lifter.
Disconnect plug connections on both monitor sensors.
Release screw connection for temperature sensor.
Release screw connections (1) between exhaust manifold and
catalytic converter.
Installation:
Check gaskets, replace if necessary.
Replace self-locking nuts.
Coat threads with -CRC- copper paste, refer to BMW Parts
Service.
Release screw connections (1) between center muffler and rear
mufflers.
Remove catalytic converter with center muffler towards bottom.
Installation:
Check gaskets, replace if necessary.
Replace self-locking nuts.
Coat threads with -CRC- copper paste, refer to BMW Parts
Service.
RA Removing and installing/replacing catalytic converter with center muffler (Z3 /
BMW AG - TIS
09.02.2013 19:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -