3 Series E36 Z3 coupe (M52) COUPE
54 10 125
Removing and installing/replacing both cover
mounts (Z3 Coupé, M Coupé)
Remove glass tilt roof cover,
refer to 54 10 100.
Note:
When releasing screws (1):
Do not lose nuts underneath.
Release screws (1) on left/right and remove cover mount (2) from
roof frame (3).
Installation:
Tightening Torque,
refer to Technical Data 54 10 4AZ.
Installation:
If necessary, glue nuts (1) in cover mount (2).
Release screws (1) and remove cover mount (2) from roof cover
(3).
Installation:
Adjust glass tilt roof cover,
refer to 54 10 004.
RA Removing and installing/replacing both cover mounts (Z3 Coupé, M Coupé)
BMW AG - TIS
11.02.2013 11:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -