3 Series E36 Z3 (M52TU) ROADST
25 11 071
Replacing knob for shift lever
Note:
Do not twist handle during removal as this would cause the
turning lock in the knob to shear off.
Tug firmly to remove knob.
Installation:
Fit knob on selector lever, align and press on until it snaps
noticeably into place.
Installation:
Push rubber gaiter (1) down until groove (2) is exposed.
RA Replacing knob for shift lever
BMW AG - TIS
11.02.2013 03:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -