3 Series E46 316i (N42) SAL
Tighten down screw (1) of exhaust adjustment unit.
Tightening torque, 11 36 16AZ .
Tighten down screw (2) of inlet adjustment unit.
Tightening torque, 11 36 16AZ .
Remove special tool 11 9 350 .
Relieve tension on special tool 11 9 340 and remove.
RA Removing and installing/replacing inlet and exhaust adjustment unit (N42/N46)
BMW AG - TIS
20.01.2013 19:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
