3 Series E46 318ti (N42) COMP
35 41 000
Removing and installing/replacing accelerator
pedal
Warning!
Once an accelerator pedal has been removed, always replace
it with a new pedal!
Retaining clips on old part may be damaged. Foot pedal can
then slide out of steel plate.
This means there is a risk of accident!
Press down carpet.
Press locking tab (1) forwards.
Installation:
Fold locking tab (1) upwards until it engages.
Bend retaining clips forwards and lever out foot pedal upwards.
Installation:
Insert foot pedal in floor with pocket on steel plate.
Retaining clips must snap into place.
Check without fail that retaining clips have snapped into place!
RA Removing and installing/replacing accelerator pedal
BMW AG - TIS
12.02.2013 07:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
