3 Series E46 320d (M47) SAL
Pull back special tool 11 2 300 until flywheel is no longer
located in position.
Crank engine at central bolt twice in direction of rotation until first
cylinder is in firing TDC position again.
Crank engine in direction of rotation up to TDC position.
Caution!
Do not turn the engine back.
Secure crankshaft in TDC position with special tool 11 2 300.
Fit special tool 11 6 320 to inlet camshaft.
Note:
Special tool 11 6 320 must lie flush on cylinder head.
RA Adjusting camshaft timing (M47)
BMW AG - TIS
12.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
