3 Series E46 320d (M47) SAL
11 66 000
Removing and installing or replacing vacuum
pump (M47)
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Remove EGR cooler,
refer to 11 71 100.
Disconnect vacuum hose (1) from vacuum pump.
Release screws (2 and 3).
Remove vacuum pump.
Note:
Threads of screws (2) are coated with sealing compound,
replace screws or apply Drei Bond 1209 sealing compound
(refer to BMW Parts Service).
Installation:
Replace O-ring (1) and coat with antiseize agent.
Align driver (2) of vacuum pump to opening in camshaft gear.
RA Removing and installing or replacing vacuum pump (M47)
BMW AG - TIS
12.02.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -