3 Series E46 325i (M54) TOUR
12 14 524
Replacing pulse generator on exhaust
camshaft (M52TU, M54, M56)
Necessary preliminary tasks:
•
Check stored fault messages.
•
Switch off ignition.
Location:
On cylinder head at front on exhaust side.
Unlock plug (1) and detach from pulse generator.
Release screw (1) on cylinder head.
Remove pulse generator.
Installation:
Check sealing ring for possible damage, replace if necessary.
Note:
Interrogate fault memory of DME control unit.
Rectify faults.
Now clear the fault memory.
RA Replacing pulse generator on exhaust camshaft (M52TU, M54, M56)
BMW AG - TIS
13.02.2013 23:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -