3 Series E46 330d (M57) TOUR
Remove inlet camshaft (1) and carefully place to one side.
Remove exhaust camshaft (2) and carefully place to one side.
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
Remove all finger rockers (1) and set down in order.
Remove all compensating elements (2) and set down in order.
Release screws (1).
RA Removing and installing cylinder head (M57)
BMW AG - TIS
15.02.2013 09:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -