bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Checking All Glow Plugs (M47, M57)|Page 795 > < 1 RA Removing And Installing Or Replacing Glow Plug Relay (M47, M57)|Page 792
Page 1
background image

12 23 000

Checking all glow plugs (M47, M57)

Read fault memory of DDE control unit.

Switch off ignition.

For the test to be carried out properly, the battery voltage
must be greater than 9 V. Charge battery if necessary.

Release screws (1).

Remove cover from electronics box.

Installation:

Tightening torque,

refer to Technical Data 12 90 4AZ.

Disconnect plug connection (1) at glow plug relay (2).

Warning!

Danger of injury and fire!

Do not operate glow plugs when removed! 

It is not possible to ensure that heat will dissipate correctly
from glow plugs! 

RA  Checking all glow plugs (M47, M57)

BMW AG - TIS

15.02.2013  10:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Checking All Glow Plugs (M47, M57)|Page 795 > < 1 RA Removing And Installing Or Replacing Glow Plug Relay (M47, M57)|Page 792