3 Series E46 330xd (M57) SAL
Important!
Do not allow the transmission to hang off from the
transmission input shaft as this will deform the clutch plate.
Release screws.
Tightening torque, 23 00 1AZ .
Pull out transmission towards rear as far as possible, turn
counterclockwise and remove.
Installation:
Note dowel sleeves.
Replace damaged dowel sleeves.
Make sure cover plate is correctly positioned.
Installation:
Remove release unit and release lever, clean and apply
grease to relevant points.
RA Removing and installing transmission (GS5-39DZ, 4WD)
BMW AG - TIS
15.02.2013 20:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -