3 Series E46 330xd (M57) TOUR
11 14 110
Removing and installing, sealing / replacing
timing case cover (M57)
Special tools required:
•
00 0 200
•
11 3 340
•
11 6 460
•
13 5 191
Note:
If the timing chains are reinstalled, their direction of travel
must be marked.
Removing oil sump:
Refer to 11 13 000
.
Note:
After removing oil sump, provisionally reinstall front axle
support and remove special tool 00 0 200 .
Removing cylinder head:
Refer to 11 12 100
.
Removing alternator:
Refer to 12 31 020
.
Release screws on A/C compressor.
Disconnect plug (1).
Remove A/C compressor and tie back to one side.
RA Removing and installing, sealing / replacing timing case cover (M57)
BMW AG - TIS
15.02.2013 21:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -