3 Series E46 330xd (M57) TOUR
Remove gasket (1) from engine.
Remove gasket debris from sealing faces (2) and clean.
Installation:
In area of joints (1), apply a bead of sealing compound Drei-Bond
1209 (refer to BMW Parts Service) approx. 3 mm wide and 2 mm
high.
Installation:
To prevent any torsion stress during subsequent transmission
installation, use a straightedge (1) to align oil sump (3) flush with
crankcase (2).
Tighten down all screws diagonally and evenly.
RA Removing and installing, sealing / replacing oil sump (M57)
BMW AG - TIS
15.02.2013 21:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
