3 Series E46 330xd (M57) TOUR
Caution!
Never re-use a rubber mount pulled off from control arm.
Rubber-coated inner sleeve is destroyed if pulled off dry.
Replace rubber mount.
Coat control arm pin and rubber mount bush with approved
antiseize agent, refer to BMW Parts Service.
Note:
The brackets are marked as follows:
L = left bracket
R = right bracket
The larger diameters of the bores point to the front axle support.
Attach special tool 31 2 153 in first control arm bore.
Note:
If necessary, use extensions of threaded rods.
Install new bracket/rubber mount on control arm with special tools
00 7 500 and 31 2 152 / 31 2 154 .
RA Replacing bracket for left or right control arm (4WD)
BMW AG - TIS
16.02.2013 00:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -