3 Series E46 330xd (M57) TOUR
31 12 000
Removing and installing left or right control
arm (4WD)
Special tools required:
•
32 3 090
Remove output shaft.
Unscrew and remove nut.
Force control arm off swivel bearing with special tool 32 3 090 .
Installation:
Remove grease from bore and pin.
Replace self-locking nut.
Tightening torque 31 12 6AZ.
RA Removing and installing left or right control arm (4WD)
BMW AG - TIS
16.02.2013 00:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -