3 Series E46 330xi (M54) SAL
Compress installation frame of rubber gaiter a little.
Remove rubber gaiter from center console.
Installation:
Feed gaiter (1) downwards and attach to selector lever (2).
Pull gaiter (1) over selector lever and insert into center
console.
Remove soundproofing (1).
Important!
Release only the 4 screws on transmission tunnel.
Cross-member remains bolted to transfer case.
Support transmission with hydraulic lifter.
Release screws on cross-member and lower transmission.
Tightening torque, 27 00 10AZ .
RA Removing and installing selector lever (AWD)
BMW AG - TIS
16.02.2013 10:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
