3 Series E46 M3 CSL (S54) COUPE
Open retainer and detach plug (1).
Release screws (1).
Remove servomotor (2).
Unfasten screws (1).
Remove raw air housing (2).
Installation:
Make sure raw air housing is correctly seated on air duct (1) and
pins (2).
Check gasket between raw air housing and intake air manifold for
damage, replace if necessary.
RA Removing and installing raw air housing (S54, M3 CSL)
BMW AG - TIS
16.02.2013 16:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
