bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Rear Left Or Right Side Trim Panel (Coupé)|Page 2208 > < 1 RA Removing And Installing_replacing Trim On Rear Seat Backrest Side Section (Coupé|Page 2206
Page 1
background image

51 43 002

Removing and installing rear left or right side
trim panel (Coupé)

Note:

Open door and lower side window.

Remove rest side section from rear seat backrest,

refer to 52 26 008.

Remove front entrance cover strip,

refer to 51 47 000.

Warning!

Version with side airbag, head airbag, passenger airbag:

Follow safety instructions for working on cars with airbag
systems,

refer to 51 00 ...

Caution!

Do not use sharp-edged tools to remove trim (risk of damage
to head airbag).

Version with side airbag:

Note:

Risk of damage to speaker grill (3):

To lever out airbag emblem (1), place a plastic wedge on
speaker grill (3). 

Lever out airbag emblem (1) with screwdriver and plastic wedge in
opening (2).

Release screws (1).

Version with side airbag:

Also release screw (2).

Installation:

Tightening Torque,

refer to Technical Data 51 43 3AZ.

RA  Removing and installing rear left or right side trim panel (Coupé)

BMW AG - TIS

16.02.2013  23:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Rear Left Or Right Side Trim Panel (Coupé)|Page 2208 > < 1 RA Removing And Installing_replacing Trim On Rear Seat Backrest Side Section (Coupé|Page 2206