3 Series E90 316i (N43) SAL
Automatic transmission only
Illustration does not show automatic transmission.
Important!
On engines with automatic transmissions, there is shortly
before the special tool bore for the TDC position a large bore
which can be confused with the special tool bore.
If the flywheel is secured in the correct bore with special tool
11 5 120 , the engine can no longer be moved at the central bolt.
Note positions of exhaust and inlet camshafts.
Both camshaft angles point inwards at an angle.
Mount special tool 11 8 690 on cylinder head.
Release screws (1).
Tightening torque: 11 41 1AZ
.
RA Removing and installing/replacing chain tensioner for oil pump drive (N43B16)
BMW AG - TIS
17.01.2013 10:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -