3 Series E90 320d (M47T2) SAL
11 31 001
Replacing camshafts (M47T2)
Special tools required:
•
11 3 340
•
11 5 180
•
11 6 252
•
11 6 254
•
11 6 480
Necessary preliminary tasks:
•
Remove vacuum pump.
•
Remove cylinder head.
Crank engine at central bolt.
The cams on the inlet camshaft at the 1st cylinder point
downwards.
Release screw (1).
Note:
Bolt (1) must be removed beforehand as it is no longer
accessible in TDC position.
Undo plug in timing case cover at bottom.
RA Replacing camshafts (M47T2)
BMW AG - TIS
23.01.2013 06:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
