3 Series E90 M3 (S65) SAL
11 14 151
Replacing crankshaft seal (S65)
Special tools required:
•
11 5 311
•
11 5 312
•
11 5 313
•
23 0 490
Necessary preliminary tasks:
•
Remove transmission.
•
Remove clutch.
•
Remove flywheel.
Drill a 3 mm hole into shaft seal.
Important!
Risk of damage! Remove chips/shavings immediately.
Screw in special tool 23 0 490 .
Drive out radial shaft seal with impact weight.
Important!
Risk of damage! Remove chips/shavings immediately.
Remove remnants of sealant from sealant outlet (1) on left and
right.
Apply Drei Bond sealant 1209 (refer to Electronic Parts
Catalogue) to sealant outlet (1) on left and right.
RA Replacing crankshaft seal (S65)
BMW AG - TIS
22.02.2013 10:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
