3 Series E90 M3 (S65) SAL
11 14 005
Replacing front crankshaft seal (S65)
Special tools required:
•
11 2 386
•
11 5 331
•
11 5 332
•
11 5 333
•
11 6 360
•
11 7 231
Necessary preliminary tasks:
•
Remove fan cowl with electric fan.
•
Remove radiator.
•
Remove vibration damper.
Lay special tool 11 2 386 on crankshaft.
Screw special tool 11 6 360 to 80 Nm into radial seal.
Release radial seal from housing.
Repeat the operation several times if necessary.
Note:
Carefully saw open old radial shaft seal with an iron saw from
special tool 11 6 360 .
RA Replacing front crankshaft seal (S65)
BMW AG - TIS
22.02.2013 10:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
