3 Series E90 M3 (S65) SAL
Remove remnants of sealant from sealant outlet (1) on left and
right.
Apply Drei Bond sealant (refer to ETK) to sealant outlet (1) on
left and right.
Secure special tool 11 5 331 with bolts (1).
Important!
Pay attention to dowel pin.
Push special tool 11 7 231 onto special tool 11 5 331 in
direction of arrow.
Installation:
Remove support ring from shaft seal.
Push shaft seal (1) uniformly by way of fitting aid 11 7 231 onto
special tool 11 5 331 .
Position shaft seal approx. 5 mm before crankcase.
Remove special tool 11 7 231 .
RA Replacing front crankshaft seal (S65)
BMW AG - TIS
22.02.2013 10:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -