3 Series E90 M3 (S65) SAL
11 28 020
Replacing tensioning device for alternator
drive belt (S65)
Important!
Mark the direction of rotation of the drive belt if it is to be
reused.
Replace the drive belt if it is fouled with coolant or engine oil.
Necessary preliminary tasks:
•
Remove fan cowl with electric fan.
•
Remove A/C compressor drive belt.
Release screws (1).
Remove alternator drive belt.
Remove belt pulley (2) from coolant pump.
Release screws (1 and 2).
Remove belt tensioner (3) with tensioning pulley.
Installation:
Observe the installation direction if the belt tensioner is replaced
individually.
The lettering TOP must point upwards.
RA Replacing tensioning device for alternator drive belt (S65)
BMW AG - TIS
22.02.2013 10:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
