3 Series E90 M3 (S65) SAL
Important!
Rotate crankshaft at central bolt back until special tool
11 5 320 can be secured in the 10
°°°°
position.
Position VANOS adjustment unit on camshaft.
Hexagon socket screw points upwards.
Insert central bolt (1) and screw with special tool 00 9 120 .
1.
Joining 10 Nm
2.
Joining 20 Nm
3.
Settling torque 80 Nm
4.
Torsion angle 200
°
5.
Unscrew central bolt.
6.
Joining 10 Nm
Insert central bolt (1) and screw with special tool 00 9 120 .
1.
Joining 10 Nm
2.
Joining 20 Nm
3.
Settling torque 80 Nm
4.
Torsion angle 200
°
5.
Unscrew central bolt.
6.
Joining 10 Nm
Remove hexagon socket screw (1) or special tool 11 5 370 .
Note:
Picture shows cylinders 1-4.
RA Removing and installing/replacing right exhaust VANOS gear (S65)
BMW AG - TIS
22.02.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -