3 Series E92 316i (N43) COUPE
Filling rivet heads 3 and 8 with foam:
Slide in tube through A-pillar hole up to marking from the top
down.
Fill cavity in an operation lasting 5 seconds.
Insert tube through screw fastening point for B-pillar seat belt and
slide in upwards up to marking.
Fill cavity in an operation lasting 3 seconds.
Driving through rivet heads 3 and 8:
Drive out rivet head with a 6 mm punch.
Rivet remnants drop into foam nest (1) in B-pillar cavity and
remain there.
Drive out rivet head with a 6 mm punch.
Rivet remnants drop into foam nest (1) in A-pillar cavity and
remain there.
RA Removing and installing or replacing left or right head airbag
BMW AG - TIS
20.01.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
